MODEL 30 SD

Width 46", Depth 47", Height 53"

Table: 14" x 38 ¼" plus 3 ¾" x 7 ¼" projections beyond disc. Normalized, fine grain cast iron, heavily ribbed, surface ground. Tilts 30 degrees up and 45 degrees down, using ball bearing mounted worm gear mechanism. Gear tilt table and table elevating mechanisms are standard equipment. Front and both ends are machined. Top surface grooved 3/8" x ¾".

Disc: 30" dia. Cast aluminum completely machined, electronically balanced, ¾" thick at rim, 1" thick at hub, centered by 10" flange to which it is attached by 4 studs. No holes in face of disc. Grinding can be done by resting work on table or "off-the-hand".

DISC - 30 " CAST ALUM
HUB - 10 " DIS. CAST IRON
MOTOR - 5 OR 7.5 HP 3 PHASE
STARTER - MANUEL, MAGNETIC OR REVERSING.

    
Addison Abrasives
 341 W. Interstate Rd,
Addison Illinois 60101
Tel 630 543-1850
Fax 630 543-5207
info@addisonabrasives.com